Get a Quote
Get a Quote
Browse related product categories

DL-50 Aluminum Cable Lug for Compression Termination

Cable termination component. Match the conductor cross-section, barrel dimensions and fixing-hole size to the cable and equipment terminal.

Model
DL-50
Conductor size / configuration
50mm²
Bolt hole diameter
10/12/14mm

Initial response within 1 hour during business hours.

Product specifications

SKUSW-0034
ModelDL-50
Conductor size / configuration50mm²
Bolt hole diameter10/12/14mm
HS Code8536.90
Standards / compliance referenceCE / RoHS / IEC 61238

Product details and selection guidance

DL-50 aluminium compression cable lug

DL-50 aluminium cable lug for a listed 50 mm² conductor size. Existing hole options are 10, 12 or 14 mm; confirm the required variant against the terminal stud.

The lug must match both the conductor and the equipment connection. Select the hole option from the actual stud and drawing, then check barrel and palm dimensions. Confirm the offered lug material and the required interface treatment with the terminal arrangement.

Selection information

  • Provide conductor material, cross-section and construction.
  • Choose the required 10, 12 or 14 mm hole option and confirm the stud dimensions.
  • Check barrel length, palm dimensions and the compatible compression tooling.
  • State finish, packaging quantities and any model-specific test-document requirements.

Prepare your enquiry

Send the product reference, drawing or datasheet, quantity and delivery destination. Any standard or approval requirement should be checked against documents covering the exact offered model.

Related product references: YJV 1×630 low-voltage XLPE power cable · 10kV single-core outdoor termination, 300–400 mm².

Additional product information

50mm²铝电缆压接端子,配电主干线连接

FAQ

Frequently Asked Questions

How do I confirm whether DL-50 Aluminum Cable Lug for Compression Termination is suitable for my project?

Check conductor cross-section, copper or aluminium conductor material, barrel dimensions, stud-hole diameter, palm geometry, surface finish and compatible crimping tooling. For a strict match, send drawings, original model code, installation photos or a bill of quantities so Younxin can review the application before quotation.

What RFQ details are needed for DL-50 Aluminum Cable Lug for Compression Termination?

Please share the product name, quantity, destination country, required standard, technical parameters, packing rules and delivery schedule. This helps Younxin confirm availability and prepare an export-ready quotation.

Which category is this product related to?

DL-50 Aluminum Cable Lug for Compression Termination is related to Aluminum and Bimetal Lugs within the Cable Installation and Termination range. You can compare nearby models and related items from the category page at https://younxin.com/products/scenario-cable-installation-termination/scenario-cable-lugs-connectors/scenario-cable-lugs-connectors-aluminum-and-bimetal-lugs/.

Can Younxin help find alternatives if the exact model is unavailable?

Yes. Younxin can compare the application, size, rated parameters and material requirement, then suggest a practical alternative for buyer review when the original model is unavailable.

Can this product be supplied with export packing and documents?

Yes. Younxin can support export packing, labels, product photos, commercial documents and project communication. If test reports, certificates or special marks are required, please confirm them before production.

Need Power Project Support?

Products · Quotation · Technical Support

BOM
List
Alternatives WhatsApp
Contact sales